Spektrum Analizör
Spectran EMC spektrum Analizörü Seti-2
Spectran HF-60100 V4, Spectran NF-5030, HyperLog 60100, BicoLog 30100E

Fiyatı: 5479  EUR + KDV


1 adet Spectran HF-60100 V4
1 adet Spectran NF-5030
1 adet Spectran HyperLog 60100
1 adet BicoLog 30100E
Şık alüminyum taşıma çantası

Spectran EMC spektrum Analizörü Seti-2

Spectran EMC Set-2

Far Field EMC Measurement Kit for all EMC measurements up to 9,4GHz incl. EN55011, EN55022 etc.. With Analyzer-Kit, BicoLOG EMC antenna and software with limits display.

This EMC bundle saves expensive and time-consuming EMC laboratory costs!

Be perfectly equipped for any measurement challenges like:

  • EMC Pre-Compliance measurement (EN55011, EN55022, EN50371 etc.)

  • Estimation of interference field strength

  • Verification of shielding and filtering

Patented technology:

Based on a patented spectrum analyzer method Aaronia can offer professional RF and EMF measurement at a spectacular price level.

Detect sources of interference, find out more about their causes, determine the frequency and intensity of the signal sources, measure limits and boost the functionality by using our high-end PC software via integrated USB.

Award winning:

All NF SPECTRAN units are equipped with our award winning REAL 3D (isotropic) magnetic sensor. In 2009 the magazine "Elektronik" (Europes most comprehensive magazine on electronics) honored the Aaronia REAL 3D sensor as "Product Of The Year" in the category "Passive Electronic Parts".

Made in Germany:

All SPECTRANs and antennas are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standard so that Aaronia can offer every customer a full 10 year warranty for all SPECTRAN spectrum analyzer and EMC antennas.

Real-time Spectrum analyzer software (included for FREE):

All SPECTRAN units offer a USB interface with real-time remote control to your PC or MAC. The free analyzer software, which is available for MAC OS, Linux and Windows, transforms any SPECTRAN in a powerful measurement solution with great features (e.g. recording, multiple window display, histogram, waterfall diagram, unlimited number of markers, enhanced limits display etc.).

EMC Analizör Set Datasheet : 

Teknik Özellikler

1x SPECTRAN HF-60100 V4 Analizör

  • Frekans aralığı: 1MHz to 9,4GHz

  • Incl. Option 002 (TCXO)

  • Incl. Option 020 (internal PreAmp)

1x SPECTRAN NF-5030 Analizör

  • Frekans aralığı: 1Hz to 1MHz

  • Incl. Option 005 (DDC)

1x HyperLOG 60100 Anten

  • Frekans aralığı: 680MHz to 10GHz

1x BicoLog 30100E Anten

  • Frekans aralığı : 30MHz to 1GHz

Diğer Özellikler

  • Detaylı bilgi için ürünlerin sayfalarına veya datasheet linkine bakınız.

Uygulama Alanları

  • EMC Pre-Compliance measurement (EN55011, EN55022, EN50371 etc.)

  • Estimation of interference field strength

  • Verification of shielding and filtering

Paket İçeriği

  • Spectrum Analyzer SPECTRAN HF-60100 V4 incl. Option 020 (int. PreAmp), Option 022 (ext. PreAmp) and Option 002 (TCXO)

  • Spectrum Analyzer SPECTRAN NF-5030 incl. Option 005 (DDC)

  • HyperLOG 60100 EMC directional antenna

  • BicoLOG 30100E EMC radial isotropic antenna

  • Pistol grip with mini tripod function

  • 1m SMA cable

  • 1m SMA to SMB cable

  • SMA adapter (m/m)

  • SMA tool

  • 2x SPECTRAN 1300mAh rechargeable battery (integrated, one each)

  • Battery charger and power supply incl. international adapter set

  • Large aluminum carrying case with foam protection

  • Detailed English manual (on CD)

  • Analyzer software for MAC OS, Linux and Windows (on CD)


  • Option 001 (1MB Memory Expansion) : This memory expansion is a MUST-HAVE particularly when using the data logger, as the standard capacity can quickly become exhausted in this mode. The memory expansion provides space for more than 10 000 logs, while the standard memory will only last for approximately 100 of them.
    Standard memory size is 64K.

  • Option 205 (10GHz Broadband Peak Power Meter for HF-60100 V4 (X)) : This option expands your SPECTRAN with a Peak Power Meter with full 10GHz of bandwidth. Furthermore it allows exact measurement of signals with high crest factor like those of WLAN technology, and even extremely short signals, like Radar bursts. What's more, measurement is performed in real-time and broadband, while at the same time being temperature-compensated. It is also an perfect solution for measurement of cable attenuation or receiver output. Depending on the actual frequency, the Power Meter provides a sensitivity of up to approx. -50dBm, while the maximum usable level is +10dBm. By adding our 20dB attenuator (see price list), the maximum measurable signal level can be enhanced to +30dBm.

  • Option 006 (3D Sensor for Static Magnetic Fields) : This top-grade geomagnetic field sensor provides the ability to conduct geophysical assessments and measurement of geomagnetic field anomalies. However, it can also be used to turn the instrument into a Gaussmeter, measuring the difference between field strengths (static fields) of permanent magnets. Thanks to its ISOTROPIC (3D) construction, measurements can be performed in all three spacial dimensions at once (or separately). The sensitivity is about 10nT-600T.

  • Option 008 (20MHz Frequency Extension) : This 20MHz frequency extension option vastly enhances the frequency range of the NF-5030. Amongst others, it brings the ADSL and 13.56MHz RFID frequency bands in range. The maximum frequency range of the NF-5030 without option 008 is 1MHz.

  • Option 009 (24Bit Resolution for 3D Static Magnetic Field Sensor) : Option 009 provides a significantly higher resolution for the optional 3D magnetic field sensor for measurement of static magnetic fields (option 006). It is absolutely mandatory for geomagnetic surveys. The standard resolution of the NF-5030 without option 009 is 14Bit.

  • Option 010 (30MHz Frequency Extension) : Our 30MHz frequency option extends the frequency range of the NF-5030 or NF-XFR to the absolute maximum. The new frequency range is 1kHz to 30MHz. Amongst others, it even allows measurement of VDSL2. The higher clock frequency of the DDC provided by this option is a MUST-HAVE for technicians and authorities needing accurate measurements of signal sources up to 30MHz. The maximum frequency of the NF-5030 without option 010 is 1MHz.

  • Option 015 - Acoustic output of the signal strength : The Option 015 provides an acoustic representation of the signal intensity, similar to a Geiger counter. This allows a fast and convenient localization of the signal sources. Perfectly suitable for signal direction finding, finding hidden transmitters or aligning antennas, especially in combination with the Peak Power Meter (Option 20 X).
    As a highlight, the dynamic can be adapted optimally by moving the reference level.